After you have succesfully compiled the software you are now ready to install it. A suitable place for the ypbind daemon is the directory /usr/sbin. Some people may tell you that you don't need ypbind on a system with NYS. This is wrong. ypwhich and ypcat need it always.
You must do this as root of course. The other binaries (ypwhich, ypcat, yppasswd, yppoll, ypmatch) should go in a directory accessible by all users, normally /usr/bin.
Newer ypbind versions have a configuration file called /etc/yp.conf. You can hardcode a NIS server there - for more info see the manual page for ypbind(8). You also need this file for NYS. An example:
ypserver 10.10.0.1 ypserver 10.0.100.8 ypserver 10.3.1.1 |
If the system can resolve the hostnames without NIS, you may use the name, otherwise you have to use the IP address. ypbind 3.3 has a bug and will only use the last entry (ypserver 10.3.1.1 in the example). All other entries are ignored. ypbind-mt handle this correct and uses that one, which answerd at first.
It might be a good idea to test ypbind before incorporating it in the startup files. To test ypbind do the following:
Make sure you have your YP-domain name set. If it is not set then issue the command:
/bin/domainname nis.domain |
Start up "/sbin/portmap" if it is not already running.
Create the directory /var/yp if it does not exist.
Start up /usr/sbin/ypbind
Use the command rpcinfo -p localhost to check if ypbind was able to register its service with the portmapper. The output should look like:
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100007 2 udp 637 ypbind
100007 2 tcp 639 ypbind
|
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100007 2 udp 758 ypbind
100007 1 udp 758 ypbind
100007 2 tcp 761 ypbind
100007 1 tcp 761 ypbind
|
You may also run rpcinfo -u localhost ypbind. This command should produce something like:
program 100007 version 2 ready and waiting |
program 100007 version 1 ready and waiting
program 100007 version 2 ready and waiting
|
At this point you should be able to use NIS client programs like ypcat, etc... For example, ypcat passwd.byname will give you the entire NIS password database.
IMPORTANT: If you skipped the test procedure then make sure you have set the domain name, and created the directory
/var/yp |
This directory MUST exist for ypbind to start up succesfully.
To check if the domainname is set correct, use the /bin/ypdomainname from yp-tools 2.2. It uses the yp_get_default_domain() function which is more restrict. It doesn't allow for example the "(none)" domainname, which is the default under Linux and makes a lot of problems.
If the test worked you may now want to change your startupd files so that ypbind will be started at boot time and your system will act as a NIS client. Make sure that the domainname will be set before you start ypbind.
Well, that's it. Reboot the machine and watch the boot messages to see if ypbind is actually started.
For host lookups you must set (or add) "nis" to the lookup order line in your /etc/host.conf file. Please read the manpage "resolv+.8" for more details.
Add the following line to /etc/passwd on your NIS clients:
+:::::: |
You can also use the + and - characters to include/exclude or change users. If you want to exclude the user guest just add -guest to your /etc/passwd file. You want to use a different shell (e.g. ksh) for the user "linux"? No problem, just add "+linux::::::/bin/ksh" (without the quotes) to your /etc/passwd. Fields that you don't want to change have to be left empty. You could also use Netgroups for user control.
For example, to allow login-access only to miquels, dth and ed, and all members of the sysadmin netgroup, but to have the account data of all other users available use:
+miquels:::::::
+ed:::::::
+dth:::::::
+@sysadmins:::::::
-ftp
+:*::::::/etc/NoShell |
Note that in Linux you can also override the password field, as we did in this example. We also remove the login "ftp", so it isn't known any longer, and anonymous ftp will not work.
The netgroup would look like
sysadmins (-,software,) (-,kukuk,) |
IMPORTANT: The netgroup feature is implemented starting from libc 4.5.26. If you have a version of libc earlier than 4.5.26, every user in the NIS password database can access your linux machine if you run "ypbind" !
All that is required is that the NIS configuration file (/etc/yp.conf) points to the correct server(s) for its information. Also, the Name Services Switch configuration file (/etc/nsswitch.conf) must be correctly set up.
You should install ypbind. It isn't needed by the libc, but the NIS(YP) tools need it.
If you wish to use the include/exclude user feature (+/-guest/+@admins), you have to use "passwd: compat" and "group: compat" in nsswitch.conf. Note that there is no "shadow: compat"! You have to use "shadow: files nis" in this case.
The NYS sources are part of the libc 5 sources. When run configure, say the first time "NO" to the "Values correct" question, then say "YES" to "Build a NYS libc from nys".
The glibc uses "traditional NIS", so you need to start ypbind. The Name Services Switch configuration file (/etc/nsswitch.conf) must be correctly set up. If you use the compat mode for passwd, shadow or group, you have to add the "+" at the end of this files and you can use the include/exclude user feature. The configuration is excatly the same as under Solaris 2.x.
The Network Services switch file /etc/nsswitch.conf determines the order of lookups performed when a certain piece of information is requested, just like the /etc/host.conf file which determines the way host lookups are performed. For example, the line
hosts: files nis dns |
specifies that host lookup functions should first look in the local /etc/hosts file, followed by a NIS lookup and finally through the domain name service (/etc/resolv.conf and named), at which point if no match is found an error is returned. This file must be readable for every user! You can find more information in the man-page nsswitch.5 or nsswitch.conf.5.
A good /etc/nsswitch.conf file for NIS is:
# # /etc/nsswitch.conf # # An example Name Service Switch config file. This file should be # sorted with the most-used services at the beginning. # # The entry '[NOTFOUND=return]' means that the search for an # entry should stop if the search in the previous entry turned # up nothing. Note that if the search failed due to some other reason # (like no NIS server responding) then the search continues with the # next entry. # # Legal entries are: # # nisplus Use NIS+ (NIS version 3) # nis Use NIS (NIS version 2), also called YP # dns Use DNS (Domain Name Service) # files Use the local files # db Use the /var/db databases # [NOTFOUND=return] Stop searching if not found so far # passwd: compat group: compat # For libc5, you must use shadow: files nis shadow: compat passwd_compat: nis group_compat: nis shadow_compat: nis hosts: nis files dns services: nis [NOTFOUND=return] files networks: nis [NOTFOUND=return] files protocols: nis [NOTFOUND=return] files rpc: nis [NOTFOUND=return] files ethers: nis [NOTFOUND=return] files netmasks: nis [NOTFOUND=return] files netgroup: nis bootparams: nis [NOTFOUND=return] files publickey: nis [NOTFOUND=return] files automount: files aliases: nis [NOTFOUND=return] files |
passwd_compat, group_compat and shadow_compat are only supported by glibc 2.x. If there are no shadow rules in /etc/nsswitch.conf, glibc will use the passwd rule for lookups. There are some more lookup module for glibc like hesoid. For more information, read the glibc documentation.
Shadow passwords over NIS are always a bad idea. You loose the security, which shadow gives you, and it is supported by only some few Linux C Libraries. A good way to avoid shadow passwords over NIS is, to put only the local system users in /etc/shadow. Remove the NIS user entries from the shadow database, and put the password back in passwd. So you can use shadow for the root login, and normal passwd for NIS user. This has the advantage that it will work with every NIS client.
The only Linux libc which supports shadow passwords over NIS, is the GNU C Library 2.x. Linux libc5 has no support for it. Linux libc5 compiled with NYS enabled has some code for it. But this code is badly broken in some cases and doesn't work with all correct shadow entries.
Solaris does not support shadow passwords over NIS.
Linux-PAM 0.75 and newr does support Shadow passwords over NIS if you use the pam_unix.so Module or if you install the extra pam_unix2.so Module. Old systems using pam_pwdb/libpwdb (for example Red Hat Linux 5.x) need to change the /etc/pam.d/* entries. All pam_pwdb rules should be replaced through a pam_unix_* module.
An example /etc/pam.d/login file looks like:
#%PAM-1.0 auth requisite pam_unix2.so nullok #set_secrpc auth required pam_securetty.so auth required pam_nologin.so auth required pam_env.so auth required pam_mail.so account required pam_unix2.so password required pam_pwcheck.so nullok password required pam_unix2.so nullok use_first_pass use_authtok session required pam_unix2.so none # debug or trace session required pam_limits.so |